Parametric Knife Holder up to 10 knives
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametric knife holder which aims to fit any length, thickness and number up to 10. No supports. FreeCAD friendly.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 452
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I love my knives being sharp and organized. But we all have different amount and sizes in our drawers, so I made a spreadsheet to help! You need to use Freecad, it's free and easy to setup :)
When in it, you will find a spreadsheet called “spreadsheet” where you can set variables :
PLEASE ADD UNITS “mm” AFTER YOUR VALUE
Set to “0 mm” knives you don't use.
- kf_blade : blade's thickness
- kf_space : space between knives
- kf_side : space between first knife and edge
- kf1_x : length knife n°1
…
- kf10_x : length knife n°10
- spacers : spacers' thickness
- holder_y : holder's lenght in Y
When you are setting knife's length, do it from 1 to 10 to avoid any error. If error appears, close the document without saving and start again.
Once you like what you made just export it in .stl (Ctrl+E) and print two copies with spacers.
In the slicer you need to rotate the part 45° in Z to fit bigger models. I printed it at 0,2mm with PLA, 15% infill and no supports.
Enjoy :)