Bluetooth LE Serial Interface for Elecraft K2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An enclosure for an Adafruit BLE UART module to add bluetooth serial to an Elecraft K2. Can be modified for other rigs.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple project to add a Bluetooth Low Energy (BLE) UART to a Elecraft K2 or any other radio with a proper RS232 interface so that it can interface with logging software. BLE is the only interface that iOS supports for example. I use this with RUMlog2go on on iPad.
The PDF file gives details on the wiring. NOTE Issue 2 just updated with a change to grounding when used with Elecraft K2
I printed it in PETG at 0.15mm layer height so I could have a transparent lid to see the LED. PLA would also work although harder to get transparency.