Infill Swatches!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These infill swatches are cross compatible with all of my other large swatches and accessories!
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 168
- Wydruki
- 4
- Wyświetlenia
- 1598
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
These are Infill swatches that are the same size as the slotted version of the filament swatches I made Here!
I also recommend that you print a nice case for these!
There is both a 3MF and 16 .gcode files (1 for each kind of infill in PrusaSlicer).
There is also a label so you can write what kind of infill is on the swatch in a fine point sharpie.
If you slice your own files make sure to adjust the Infill setting by clicking on the Infill; Layers and Perimeters" section. From there you can make any adjustments you need :)
If you like this design then maybe you would like to check out my other designs :-)
The ULTIFIDGET >>>
<<< Cointrap V3
Prusameters! >>>
Thanks! Happy printing!