Ridgid Oscillating Belt Sander 4" Dust Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a two-part assembly that shrouds the end of a Ridgid oscillating belt sander and adapts it to use a 4in hose.
- Ocena
- 5 / 5
- Polubienia
- 103
- Pobrania
- 1025
- Wydruki
- 4
- Wyświetlenia
- 4690
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a two-part print that provides a close-fitting shroud to replace the stock shop-vac size 2.25" dust collection system with an intake for a 4" dust collector. It requires minor assembly (epoxy or thick super glue) and minor modification to your sander's table (drill and tap two holes.)
The parts print with no supports required and epoxy together easily, then attach to the sander with a pair of #8-32 machine screws. VHB double-sided foam tape would also be effective on clean surfaces if you did not want to modify your sander's table, just harder to remove if you want to use the whole end of the belt. The shroud does not need to be removed to replace the belt, or swap the belt to the spindle.
