1 / 1
Bolt on holder for bicycle seatpost mounted lights — zdjęcie 1

Bolt on holder for bicycle seatpost mounted lights

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple adapter I designed to mount a bike light to the back of my bicycle rack. Uses an M5 nut to bolt to.

Ocena
0 / 5
Polubienia
5
Pobrania
32
Wydruki
0
Wyświetlenia
870
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Used to attach a Light and Motion rear light to the back of my Ibera bike rack.  You may also need the 10mm to 5mm washer if the hole is over-sized.  

Prints flat on the build plate with no supports.  Uses an M5 nut and bolt to mount to anything.  Creates a roughly 30mm diameter post for mounting bike rear lights and seat post accessories to something that doesn't have a seat post.  

The tab at the bottom stops things from sliding down.  

I recommend printing in PETG or ABS for outdoor use.  

Tagi