Kalih Choc V1 Plate Support Fork
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plate support fork for inserting Kailh Choc v1 switches into 1.2mm switch plates.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 704
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 3D printable switch plate fork for Kailh Choc V1 switches. The fork prevents the 1.2mm thick switch plate from bending while inserting switches onto the pcb, making the process a lot easier.
IMPORTANT: this is for Kailh Choc V1 switches. The version for MX Switches can be found here.
Variants
There currently is only one version for 1.2mm thick switch plates which is the norm for Kailh Choc V1 switches.
- 1.2mm Switch Plates (Standard Choice)
Design
The space between the PCB and the Switch Plate (w/ a 1.2mm standard thickness) is 1.0mm. The fork has a thickness of 1.2mm to ensure the Kailh Choc V1 switches properly clip into the plate. The switch cutouts on the fork is slightly wider and longer to provide a better supportand to allow the clips of Kailh Choc V1 switches to snap.
Print Settings
- Infill: 15-20% Gyroid
- Perimeters: 2 (can also do 3)
- Layer height: 0.2mm
- Supports: none