Plant Watering Spout (water bottle attachment)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
3,23 € – 3,95 € netto (bez VAT)
Dla pliku: CE3PRO_Spout 002.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,59 € netto (środek widełek).
- Masa podana przez autora
- 26 g
- Czas druku podany przez autora
- 4,5 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This is a spout attachment for commonly used water bottles for watering plants.
- Ocena
- 4,75 / 5
- Polubienia
- 164
- Pobrania
- 1501
- Wydruki
- 17
- Wyświetlenia
- 4922
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
In the area that I live, various attachments, such as spray heads, for commonly used drinking water bottle can be found in shops. Hence, I was inspired to make a spout attachment for watering plants.
I took the easy way in designing this spout. The spout is press-fit onto the original water bottle cap, instead of equipping the spout with screw threads matching the water bottle. The installation of the spout attachment is simple. First, drill a hole in the original cap. Then, press the spout onto the cap. The cap and the spout was designed to fit closely, therefore, a little bit force is needed to press them together. If the fit is a little bit too lose, users may apply a little bit of glue between the cap and the spout. Users may adjust the fit between the spout and the cap by using the scale function of your slicer. Scaling to above 100% will make the fit lose and vice versa.
A sample GCODE file is attached for easy reference.
Users may also slice their GCODE with the attached STL file to suit their needs.
— Edited on 25 Aug 2022 ---
A new version equipped with internal threads was added to this project for installing the spout onto a drink bottle directly. To solve water leaking problems from the threads, a short tapered tube was added inside the cap portion of the spout. The short tube fits inside the drink bottle and forms a tight fit that water cannot leak to the threads. However, I found that the designs of the threads portions of bottles varies from brands to brands. Hence, the solution may not be able to cover all drink bottles. Slight water leakage from the threads may be found in certain brands of drink bottles. In such cases, the design requiring the use of the original cap of the drink bottle may be used.
A sample GCODE file is attached for easy reference.
Users may also slice their GCODE with the attached STL file to suit their needs.