Filament Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A filament spool holder designed to allow the spool to rotate while placed on a flat surface.
- Ocena
- 4,804 / 5
- Polubienia
- 777
- Pobrania
- 5550
- Wydruki
- 161
- Wyświetlenia
- 24 014
- Oceny
- 148
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A filament spool holder designed to allow the spool to rotate while placed on a flat surface. The stand is universal and can be used with the Prusament filament spools.
Take a look at our website for more designs and custom 3D prints: https://halcondesigns.co.uk
Print instructions
Recommended Hardware:
- 4 x Standard 608 Bearings (required)
- 4 x M3 x 12mm Socket Button Screws (required)
- 4 x M3 Hexagon Nuts (not required, but preferred)
Links to Hardware:
Standard 608 Bearings: https://www.amazon.co.uk/gp/product/B00WXDAUQG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
M3 x 12mm Socket Button Screws: https://www.accu.co.uk/en/socket-button-screws/8104-SSB-M3-12-A2
M3 Hexagon Nuts: https://www.accu.co.uk/en/hexagon-nuts/7888-HPN-M3-A2
Stand will be compatible with most spools, but will not be compatible with spools with an outer diameter of 162mm or less