Meanwell LRS-350 Sideways Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket to mount a MeanWell LRS-350 power supply on it's side vertically. I designed this mount to be simple…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 1104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a bracket to mount a MeanWell LRS-350 power supply on it's side vertically. I designed this mount to be simple and conscious of the vent holes. The two brackets for one power supply are identical. it has countersunk holes for mounting with wood screws.
This mount is fairly strong, however it does have some flex and I would not trust it in an extremely rough environment where a lot of strain will be put on the brackets.
To mount it you will need two m4 bolts with length ~5.5mm and 4 screws to mount the brackets to your material of choice .
This mount will work with any power supply that shares the same dimensions as the MeanWell LRS-350 series: https://www.meanwell.com/Upload/PDF/LRS-350/LRS-350-SPEC.PDF
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Infill:
100%
Category: Electronics