OLED Standoff for Kulp Lights controller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple standoff that I designed for the Kulp Lights K8-B OLED screen. I did not like how there was no easy…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a simple standoff that I designed for the Kulp Lights K8-B OLED screen. I did not like how there was no easy way to keep the OLED screen secure, and no standoffs or screws were included with mine. I would expect that this design will also work for the K16A-B as well as the K32A-B however I do not have any way of testing that.
I recommend using a soldering iron to gently melt the top of the standoffs to secure them to the OLED as can be seen in my picture. This will still allow for easy removal of the OLED, and if needed the plastic can be cut very easily.
Print with supports with the oval side facing downward. Printing slow is necessary for a design with such small layer times. It is recommended if printing multiple of these to place them far apart of the build platform to give each part adequate time to cool away from the hot nozzle between layers.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Infill:
100%
Category: Electronics