ESEE Izula handle scales
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle scales for the normally skeletonized Izula knife from ESEE.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 166
- Wydruki
- 1
- Wyświetlenia
- 1417
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This model has the two handle scales as well as an inner spacer that fits into the inner part of the knife handle.
The fasteners in use are 1/2" 6-32 machine screws and nuts. I chose these because it's what they had at the hardware store. If you need their exact dimensions, they're in the CAD file.
If you want to use a different fastener, you can edit the variables at the top of the CAD file. You should be able to edit the dimensions of the nut and screw as well as the scale thickness to fit any small fastener. The CAD file is a bit of a mess so there's not much else you can easily change.