Support Brace for Belted Z Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the best mod for any ender to support the z axis more.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 586
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a thing i remixed, to add some supportbraced to my belted z mod for the Ender 3. (https://www.thingiverse.com/thing:4243512)
you dont need to rotate the stl, they should be correctly oriented, but you will need supports enabled.
i printed them after the recommenden Mod settings with treesupports out of PETG. I put them on my printer, but couldnt test them yet. at least they fit and feel sturdy.
BOM:
2x M10x50cm threadded rod
8x M10 Nuts and washers
8x M5x8 SHCS and T-nuts
Instructions should be straight forward, put in the bottom bracet first , then push the rod through it. preload the top bracet and put it on. slide the threadded rod into th top bracet and tighten everything. try not to force both bracets apart, this could damage them. just hand tighten the inner nuts and then counter them with the outer nuts.