1 / 7
Improved remix of a simple LM2596 enclosure / case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified to be used with already soldered wires and modified to screw it on a piece of wood. Now with better tolerances.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 134
- Wydruki
- 4
- Wyświetlenia
- 478
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 4) (Komentarze: 8)Remiksy (0)Kolekcje (25)Powiązane
I needed some modifications on this piece.
- Vertical slots to be able to insert a LM2596 with wires already soldered on.
- 2 holes to screw it on a piece of wood.
- The screw holes for the lid are now fixed to the side. This gives the wires some space below and a better fit.
- Lid with better tolerances to include some “forgiveness” fir the fit.
This design is part of my frame, bracket and holder collection for various boards and components: https://www.printables.com/@a123qwertz567/collections/2632544
Print instructions:
- recommended layer height 0,2 mm
- No supports needed
I would be happy to see some of your makes posted :)
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.