Skadis Filament Swatches plus Labels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament swatches for IKEA Skadis boards, for most filament types, plus labels
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 156
- Wydruki
- 2
- Wyświetlenia
- 1126
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of xyren's swatches. In the original, the pins cover the text on the back of the swatches, so I remixed the swatch (thanks to the Fusion 360 file provided) to rotate the text and make it readable. I also added swatches with ABS, PC, ASA, TPU etc. I didn't bother to imprint the color names, there are just too many. I simply use a Sharpie to write them on the back.
And for good measure I designed labels for the different filament types. 3mf file included with a manual filament swap to create an accent color.
Parenthetically I was reminded what crap this board (and pretty much everything IKEA) is. On my board, the pins fit snugly in the openings on the right side of the board, with the same pins being very loose on the left side ☹
I printed everything at 0.3mm layer height.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.