Small Rubber-like Equipment Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Measuring just 20mm high and 20mm in diameter at the top, this foot can used where mounting space is limited.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Originally printed in a generic flexible filament from Flashforge with:
- 15% infill
- 1 shell
- 180℃ extruder
- 50℃ platform
Some elephant footing occurred, plus some stringing, and it welded itself to the build platform, so adjust your temperatures and speeds to suit your printer.
Printed with the top on the platform so that no support material needs to be used on the very small overhang between the countersink and screw holes.
Designed to fit a M3 screw from the recessed bottom.
This model uses a 3.6mm screw hole to accommodate the Adventurer 3's inaccuracies (by accounting for the 4mm nozzle diameter).