Ahsoka Tano TCW Lightsaber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A screen accurate version of Ahsoka main hilt. Internally is hollow so you can add weight in order to make it feel…
- Ocena
- 4 / 5
- Polubienia
- 40
- Pobrania
- 129
- Wydruki
- 2
- Wyświetlenia
- 1006
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
A screen accurate version of Ahsoka main hilt.
Internally is hollow so you can add weight in order to make it feel less toyish.
The inner diameter is 23mm.
The black part near the pommel you need to mask it with some tape to paint it, it's 11mm tall.
I've made the 2 little pins on the side with an iron wire with diameter of 2mm, even tho i've included them I recommend using the wire
UPDATE: I've added a new shorter inner chamber to match the one from the siege of Mandalore
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Infill:
30% for inner/outer chamber and pommel - 90/100% for the other
Post-Printing
Category: Props