1 / 2
Air Compressor Motor Fan Blade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement fan blade for an old Rockwell 1-1/2hp belt/disc sander
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 742
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
Just picked up an antique Rockwell Belt/Disc sander that had a bad motor, or so I was told. Once I took it apart, I found the fan blade was broken and a piece logged into the case causing the motor to be stuck. I modeled a new one in Fusion 360 and printed in ABS with a brim for the thin blades and 100% infill. Motor now runs like new. Blade will fit any electric motor with a 5/8" double flat sided shaft and a diameter of 6-¼".