ROCKBROS Suction Roof Bike Rack 12mm Thru Axle Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
v3: similar to v2 but added a flange to prevent the fork from falling and potentially damaging the car's…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 936
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
v3: similar to v2 but added a flange to prevent the fork from falling and potentially damaging the car's roof/windshield while positioning the bike. Still should print without supports.
v2: Beefed up the sides a bit and made it printable in either orientation without supports. My initial version failed on me after tightening the thru axle too much, v2 should be more rigid and handle more wear and tear.
Adapter to attach a 12mm thru axle bike to the suction mount roof rack rockbros sells. I made two versions, one that can friction fit, another that a seal can be added to if you want. \
Print with 100% infill since this will need to handle some compressive stress. Can be printed without supports.
Tips are appreciated if this helps you out!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Generic PETG Black
Category: Sport & Outdoors
