1 / 1
🔐 V3 lock hook Carabiner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carabiner for your keys, with locking hook. No extending under load. No decreasing under pressure. No key ring slip off.
- Ocena
- 4,944 / 5
- Polubienia
- 464
- Pobrania
- 4807
- Wydruki
- 86
- Wyświetlenia
- 9031
- Oceny
- 72
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 86) (Komentarze: 98)Remiksy (3)Kolekcje (657)Powiązane
Info:
- v3 remastered version of my previous carabiner model (created after a while of using it) - (it still uses great locking idea from this model - thanks!)
- so this carabiner has the same locking hook, which does not allow carabin to be extended
- added:
- better protection against slipping key ring outside unwillingly
- protection against changing the shape when under pressure (pressing carabiner on both round ends does nothing, carabiner is still “locked”)
- small but important change, still very simple carabiner
Dimensions:
- its height is 6,5 cm
- adjust scale if you want other size
Print info:
- use PETG for flexibility
- use brim for textured plate
- i used 8 perimeteres - so whole body is made from perimeters only for more strength
- 0.2mm layers
Note: if you want carabiner with partition for key rings - check it here.
When it is printed, sometimes it may be little bit hard to separate the lock ends from each other, but little bending/twisting with hands should do the job quickly.