Dobsonian Telescope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a telescope build around a PVC tube. It uses components available in any hardware store, a set of two…
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 4123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a telescope build around a PVC tube. It uses components available in any hardware store, a set of two telescope mirrors and some 3d printed pieces.
F=750mm
D=150mm
F/D=5
This was a 2020 summer project, it took me a lot of time. I do not recomment you to use this design (it takes a lot of time and some parts are not finished). This is not a finished project, the blueprints are messy. For example I think that the focuser I have designed is not very good...
But I am posting it on Thingiverse to share my ideas and to give an example for people who wants to build there own telescope. I think that the design of the primary and secondary mirror cells are quite good.
I'll try to post some instructions in the following weeks
Category: Physics & Astronomy