Atmel ICE Enclosure Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mod for the middle part of "Enclosure case for ATMEL ICE PCBA programmer/Debugger AVR and SAM" by JRodrigo.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a mod for the middle part of "Enclosure case for ATMEL ICE PCBA programmer/Debugger AVR and SAM" by JRodrigo.
You can find it here: https://www.thingiverse.com/thing:2509677
This mod designed to secure the case by four M2 screws and nuts with some other minor improvements. There are two versions included for different length of screws. I only tested 10mm Ver because that is the only size that I have right now.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
15%
Filament: Generic PLA White Post-Printing =============
To assemble this kit, you will need:
- M2-8mm or 10mm Screw X 4
- M2 nut X 4
- Super glue to glue the top part and middle part after all four nuts placed in slots.
Category: Electronics