Tweezer Ramp Storage 24-Slot for 5-inch/125mm Depth Drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small 24-slot storage for tweezers and other small tools
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This simple storage unit is designed to hold 24 tweezers or other small tools.
Blender was used to design this using boolean subtraction only from a large block. Subtraction seems to be the only reliable way to get good manifolds using Blender. The Blender file is included for remix or modification purposes.
Any rigid filament can be used, I printed this in ASA. All overhangs are 45-degrees, so this can be printed without support if the resolution is 0.3mm or better. No adhesion should be needed, since the bottom is completely flat.
Feel free to share, modify, or remix as you like. Enjoy!!