Undercabinet Knife block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small easy to print affordable way to Save counter space
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 699
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
*Update* (Added a model without the slight slope to move the blades out of the way & a Finger Guard. Glue version and one with Tabs that use m3 Machine screws. If you put the sloped Version backwards it will slope the knifes down and I would recommend you print the fingerguard then.)
This little Undercabinet Knife block can hold 9 Knifes. I have 2 Chef's knifes a bread knife and 6 various other knifes in mine. There's a Hole to hold the Sharpening steel and the Mount Hides away under the cabinet. I used 6x1 ¼" wood screws to mount it and had no issues. The mounting holes are 8mm wide recessed for the screw head and 4mm wide hole for the screw to pass though. There is a small F engraved to show the Front of the model in the slicer. If you print at a .2 layer height it will not show up in the actual print. The front is Important as there is a slight slope to point the knifes blade Up and away.
I would Face the Blade of the Knife inwards for safety though with them being Mounted in the space Under the cabinet I don't think there's much chance for injury.