Stretchi! - Reusable silicone-sealing food gadget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stretchi is a sealable kitchen gadget useful for keeping foods like avocados, pears, or watermelon slices fresh!
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 1023
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stretchi is a sealable kitchen gadget useful for keeping foods like half-avocados, half-pears, or watermelon slices, fresh!
When you put food in it, it simply expands by pushing the stretchy silicone outwards! No unwanted air (ew!) and no nonsense!
Included are the original files, useful if you wanted to increase or decrease Stretchi's size (and still have screws fit).
Right now, you'll need:
- 8x M2 12mm screws (measured from top of head to bottom)
- Some reusable (food safe) silicone sheeting. Anything from 0.4 - 1.0 mm should work. Take a look here if you're not sure where to pick some up: https://silex.co.uk/shop/sheeting/solid-sheet/ultra-thin-silicone-sheet/
Assemble by squishing and screwing the silicone sheet between the two top circles and tightening down the bolts. Screw together the bottom and top pieces and bam, dunzo!
That's it! You're ready to both save the environment and take care of your health. Remember that PLA, PP, co-polyester, PET, PET-G, HIPS, and nylon-6, as well as some brands of ABS, ASA, and PEI are all food-safe (https://formlabs.com/uk/blog/guide-to-food-safe-3d-printing/).
Print settings:
0.12 layer height
25% Infill
3 walls
4-7 roof/ceilings
40-50mm/s
Happy printing!
(Avo used in render is by svnfbgr: https://sketchfab.com/3d-models/half-avocado-36443c0fd59a4b98b3312401c6b9d50c)
