1 / 4
diatone Roma F4 LR Li-Ion mount with Runcam Thumb adapter. — zdjęcie 1
1 / 4

diatone Roma F4 LR Li-Ion mount with Runcam Thumb adapter.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

battery mounting plate for Li-Ion batteries

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
404
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

work in progress.

Modification to the Roma F4 LR frame to secure a Li-Ion battery tray.  

Battery spacer is to allow two 2cell trays to create a 4s battery pack with replaceable cells.  

the plate allows for a battery strap to be mounted without potential damage to or interference with your flight controller.  Even if you dont use the Li-Ion trays, the battery strap cutout can be useful.  

The quad shown is still in POC state.  I transferred a badly flying quad to a new frame, only replacing the VTX with a speedy bee TX800.  The mamba 411 board has no BEC, so the 5V input was better than taking VBAT from the battery pack directly.  There will be updates to better secure a more appropriate antenna 

 

History.  This project started as a 2s liIon 3dprinted 4 inch frame.  after exceeding the 250g boundry, I gave up on 2s in favor of 4s and the difference is worth the extra weight.  This is not a freestyle ripper, but a long range recon.  

Tagi