Infinity Cube BASE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a base for the Infinity Cube and allows for ESP8266 useage.
- Ocena
- 5 / 5
- Polubienia
- 103
- Pobrania
- 444
- Wydruki
- 10
- Wyświetlenia
- 3060
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I did NOT create the Infinity Cube…. you can find that here :
https://www.printables.com/model/41750-infinity-cube-light/comments/327137#
What i did create was the base for it. These types of cubes tend to sag over time (i made one from Oak 2x2s and it sagged) So i wanted a base to put it on. I create also used a D1 mine ESP8266 for the LEDs. So the base has a mount for that and a hole in the side for easy USB connection.
The cube doesn't really need to be glued in as it's a squeeze fit. Pull the corners apart slightly to get into the holes and it springs back and holds itself.