Small Spool for Filament Leftover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small filament spool to organize filament leftovers or samples and release the space took by the large but…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 177
- Wydruki
- 0
- Wyświetlenia
- 1136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a small filament spool to organize filament leftovers or samples and release the space took by the large but almost empty spools in your shelves. It is small enough that you can fit two of them in a 15x20cm box like the one in the photos.
You should print as many sides as needed per the chosen spool center. There are spool centers with one, two, and three "lanes".
Each lane can wind approximately 100g of ABS filament and a little more PLA (~120g).
The side fits tight in the spool center so that it stays firm when you wind the filament. You need some "gently" effort to fit it in the insets.