Kobra Max /Plus and Vyper Filament Sensor Support / Guide / Mount MKI
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Filament Sensor Support / Guide is suited for Kobra Max/ Plus and Vyper. Remix Based on NaNO3 Filament Guide.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 319
- Wydruki
- 3
- Wyświetlenia
- 2139
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Model is based on NaNO3 Filament Guide for the Vyper.
The Kobra Max sadly has a screw, making it impossible to use the original version.
Therefore I created a new model from scrap, based on the Original one.
I added rounded edges, so the filament should slide through easily, without using the PTFE-Tube-Connector in front.
To make sure it fits, I also added longholes, as during assembly it might get a little tight.
The original screws can be reused.
It is also possible to use this Sensor Support, without PTFE Couplers.