Corona Extruder for Prusa MK3S (and possibly others)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Corona Virus costume for your extruder.
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 1126
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A Corona Virus costume for your extruder.
Self replicating machines are en vogue in 2020 ;)
The design is a remix of Corona Virus (2019-nCoV, COVID-2019) by gregbejtlich I found here:
https://www.thingiverse.com/thing:4166787
You need a 5x5x5 neodym magnet to attach the front part to your extruder to make it spin during prints
https://www.amazon.de/magnet/dp/B00Z83UV58
Once printed you can use superglue to attach the left, right and top part to the arm.
It will sit snugly on your extruder.
The rotating piece in the front needs an 5x5x5mm neodym magnet to attach to the stepper motor.
Now you have a moving, rotating, self replicating device ;)
I also included the original v3_solid_virus.stl file and the OpenSCAD I made to create this remix. Have fun and wash your hands.
Print instructions
[x] Brim
[x] Support everywhere