Tesla ID Card / Badgeholder - supportless
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a badge holder that does not require supports and fits right off the build plate.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 495
- Wydruki
- 2
- Wyświetlenia
- 2853
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a badge holder that does not require supports and fits right off the build plate.
This particular design has the Tesla logo stamped out of it.
This requires pretty tight tolerances as the cards only have very little contact area with the supportless grooves.
If you need one of my things printed or you want to suggest a modification on a part please drop me a message!
If you print one of my things i would be happy about some feedback and a make!
If you like my things please consider supporting my caffeine addiction!