Kitchen Knife Sheath (Parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Store your kitchen kinfes medival syle!
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 963
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I present to you a model that's goin to add some medival accents to your kitchen!
This sheath was designed after a sword or dagger sheeth to both protect the blade and make you feel powerfull (and cool, duh) when drawing your mighty kitchen blade!
The attached Fusion360 model is fully parametric, you can adjust everything to suit your needs. Basic dimesions that you'll need to change are:
- knifeHeight
- knifeLength
- knifeThic
- angle
The STLs I'm providing were made for a knife that is approximately 165 mm long, 42 mm high, 1,7 mm thicc and has a handle situated at an 22,6 degees.
The sheeth is printed in 3 parts and then assembled with a bit of glue. The middle part has a pattern engraved on it and I've found the DXF for it here: https://free-dxf.com/design-wall-screen-pattern-door-screen/free-download-dxf-cdr-ai-svg/5LK6O/download/dxf
Note that the evgraving won't scale with the model if you change the paramiters! It can be shorted but unfortunatelly won't be longer than it is.
Printing
I recommend to print the parts standing up, with a bit of supports at the bottom. Mine was made out of PETG.