Replacement box for Powerfix scalpels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My box for my Powerfix scalpels/Exacto knives broke. This is a replacement, more space efficient and hase more storage
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 426
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
My box for my Powerfix scalpels/Exacto knives broke. This is a replacement, more space efficient and has more storage for replacement blades.
One thing that always bothered me with the old box how much space was wasted due to the big “Blister packaging”.
The box prints fine in PLA at 0,25mm layers. I used a modifier for more perimeters around the hinge. the hinge is copied from the original and uses the existing 2mm rod. In my first version I forgot to add some more relief holes to take out the smaller scalpel, this is fixed in the uploaded models.
The knives are held in place nicely, the replacement blades can be stored with the original magnet stripes on the top left. On the left bottom there is space e.g. for more fresh blades.
I also tried to print the lid in clear PLA, but I was not patient enough to set up the slicer correctly for a nice clear print.