Gates Idler brackets for Rostock Max v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gates Idler brackets for Rostock Max v2
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted to get rid of the old bearings and switch to all gates idlers and pulleys when it was time to replace my belts. The original design placed the belts too close to the cut edges of the extrusions. This fixes that so there is zero belt rub and the belt placement is adjustible. But, I didn't want to replace or modify a bunch of the melamine frame. Here's what I came up with!
These use all the stock hardware and original screw holes. Additional parts needed are (15) 20mm X 5mm stainless shelf pins and 5mm X 6mm X 0.2mm shims.
I printed mine using HTPLA+ but I think there has been some creep. If I reprint it will be with CF-PETG or CF-ABS.