Large Self-Watering Planter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,21 € – 0,25 € netto (bez VAT)
Dla pliku: floater-indicator.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,23 € netto (środek widełek).
- Masa podana przez autora
- 2 g
- Czas druku podany przez autora
- 16,2 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This is a rectangular planter with a water reservoir and a water level indicator that can be printed without supports.
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 195
- Wydruki
- 0
- Wyświetlenia
- 1480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Large Self-Watering Planter
This is a jumbo-sized version of https://www.printables.com/model/57885-self-watering-rectangular-planter-with-optional-la that I created from scratch and using the original model as a reference. The main change apart from the size is that I added a cap for the water column which was a common suggestion shared in the comments section. Otherwise the assembly works the same as the reference print that this remixes so I'll defer to that page for details.
Key Dimensions
The inner shell which is where you'll be placing soil and plants measures 218.00 mm length by 190.00 mm width by 119.00 mm height.
The outer shell which will guide where this fits measures 246.00 mm length by 202.00 mm width by 162.00 mm height (all the way up to the water channel).
Printing Advice
The outer shell, the floater, and the floater indicator were printed with waterproof PLA settings at 0.15 mm layer height based on https://blog.prusa3d.com/watertight-3d-printing-pt1-vases-cups-and-other-open-models_48949/. The other parts were printed at 0.15 mm layer height and otherwise default settings. The shells were printed based on the Speed preset whereas the other, smaller and more detailed parts were printed based on the Quality preset. In hindsight I think the inner shell could be optimized by using a larger layer height; the inner shell doesn't need to be waterproof so those settings aren't as important.
I did have success using PLA for the floater in spite of the warnings from the reference print. For me the key was to keep it completely hollow.
I finished all the waterproof parts with controlled, quick bouts of heat from a heat gun which several commenters suggested helps the waterproofing by essentially melting together inevitable small gaps and imperfections. I haven't suffered any leak thus far.
Commercial Use
Please reach out to the author of the original model if you would like to use this for commercial use. https://www.printables.com/model/57885-self-watering-rectangular-planter-with-optional-la