1 / 6
Toyota Corona 1976 Mark 2 - Throttle linkage bushes — zdjęcie 1
1 / 6

Toyota Corona 1976 Mark 2 - Throttle linkage bushes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

First two bushes in the throttle linkage assembly. When I get my Haynes book, i'll record the part numbers against this

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
368
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Toyota Corona 1976 Mark 2 - Throttle linkage bushes (the top one doesn't need to be printer with any support)

Printed on Ender 3 Pro (modd'ed board, BLTouch).

Cura with the Ender-3 1.16mm ChazMeister profile

Supports at 80 degrees (zig zag)

The bottom one I made with a chamfer to avoid having supports, but it works!

You'll almost certainly have to adjust the dimensions to fit the worn pin and such. PM for help if you actually need to print this for your Corona…

Tagi