Disney Monorail Playset Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to work with the Disney monorail track and trains from Walt Disney World and Disneyland.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 214
- Wydruki
- 0
- Wyświetlenia
- 1334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is designed to allow your monorail playset track to split into two. The top section slides on rails mounted to the bottom one. At the moment I only have a left side, if you would like a right turn, tell me, and I'll do it. Or you can mirror in Prusaslicer. These models are based on these files from thingverse:
https://www.thingiverse.com/thing:2378784/files
Though I will warn you that the turns in that model are too tight. Here is a link to a better one:
https://www.printables.com/model/264522-disney-monorail-playset-turn-piece
These parts should work at the scale I have them in. As it is, the part the monorail rides on is a bit loose on the base, so if you would like to modify it, here is a link to the Tinkercad files:
https://www.tinkercad.com/things/32Hx36QeUrA-monorail-switch
I did have to cut it in half for my Prusa MINI, but I think it would fit on a i3 variant. Tell me if it works if you give it a try.