1 / 3
Aquatic Life t5HO Hybrid 18" Decorative Endcaps — zdjęcie 1
1 / 3

Aquatic Life t5HO Hybrid 18" Decorative Endcaps

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a set of two STLs to print one decorative endcap for the Aquatic Life T5HO hybrid light. The total length is…

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
120
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution

This is a set of two STLs to print one decorative endcap for the Aquatic Life T5HO hybrid light. The total length is just over 18" so I cut in two parts and print it on the flat end to avoid supports. You will need to drill/tap your connecting bar for mounting screws. I made no effort to align my mounting holes with the holes already drilled in some of the OEM connecting bars. I used M4 machine screws and tapped the connecting bar as that is what I had on hand. The holes could be drilled to anything close to that size to fit what you have.

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Rafts:

Yes

Supports:

No

Category: Pets

Tagi