False Knuckle Bottle Opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I thought this would be a cool design for a bottle opener since I have never seen one like it.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
The model was designed for bottle openers, is the second version of my design.
(This description was written while the first print of the new version was printing so the information could possibly be innaccurate)
I decided to make it thicker, as well as increase the infill amount to 30% instead of 20%. The first layer does not have a skirt and is 0.2mm, then every other layer is 0.15mm. Initial nozzle temp is at 216 degrees, bed temp 60 degrees, and speed is 96. If I am correct, this saved version is at a constant 216 degrees, 60 degrees, and I do not remeber the speed.
I do not have any print files because I wanted to allow some adjustments for creators in case they wanted to change filament types, speeds, temps, etc.
Not sure if it is possible, but if you have any questions feel free to contact me via comments or messaging through prinatbles.
Also, feel free to ask for more photos of the final print.