Gaggia Classic Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dimensionally accurate Gaggia Classic housing (based on 120 V, 2016 Gaggia Classic)
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 580
- Wydruki
- 0
- Wyświetlenia
- 4575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My version of a dimensionally accurate Gaggia Classic housing model, used to check fit on components for the Gaggiuino project. Note that this is not a Gaggia Classic Pro model.
The main body is sheet metal, so manufacturing is probably not holding better than +/- 0.5 mm except on assembly jig mating surfaces, and some things could only be measured to within ~0.3 mm due to how the sheet metal was welded. I'd say the whole model is on average accurate to +/- 1 mm across the range of Gaggia Classics. However, most outer dimensions are likely accurate to better than +/- 0.3 mm
The water tank is drafted by ~1 degree externally, and for ease of modeling/mates I left the main walls vertical at MMC.
Update 2022-08-30: Added drip tray model