Toontown Rewritten Flunky / FlunkTrunk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slightly modified model of the Flunky backpack from Toontown Rewritten.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 857
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 3D printable model of the Flunky / Flunk Trunk backpack from the game Toontown Rewritten. The files were pulled from the game and edited in Fusion 360 to make them printable, and so the model would stand up by itself. I am very early on in my CAD journey, so please forgive a little sloppy work, which was greatly hidden by my wife's phenomenal painting skills!
I printed this model on my Voron 0.1 with a .25mm nozzle and no supports, but it would have printed fine with a 0.4 in hindsight, with the only real benefit coming with the glasses and the Bossbot coin.
Mirror the leg to get the other leg, the arms are different so both files were provided. The first time I printed the connecting pins they needed a bit of light sanding, however once I changed to a more reliable filament, they fit great, but bear that in mind when scaling.
The trickiest part of this print for me were the glasses, the arm is one extrusion wide for a 0.4mm nozzle, so make sure to print those nice and slowly.