1 / 4
Sewing tracing wheel, no supports, prints in 2 pieces, 1 x M3 bolt and nut required. — zdjęcie 1
1 / 4

Sewing tracing wheel, no supports, prints in 2 pieces, 1 x M3 bolt and nut required.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A tool for pressing through fabric or paper to leave indentations on another piece of paper placed behind the template.

Ocena
4,667 / 5
Polubienia
155
Pobrania
400
Wydruki
3
Wyświetlenia
1940
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

I had plenty of strength and stiffness in petg printed with 6 perimeters of .5 mm extrusion.

This prints in 2 pieces flat. Heat up the forks and bend them into the position seen in my photos. It helps to run it under cool water to cool the part faster and not have to hold it in place until it cools. 

Tagi