1 / 2
Anker Life Soundcore Q30 headphone band mender — zdjęcie 1
1 / 2

Anker Life Soundcore Q30 headphone band mender

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,42 € – 0,52 € netto (bez VAT)

Dla pliku: headphone spring support_0.3mm_PETG_MK3S_32m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,47 € netto (środek widełek).

Masa podana przez autora
5 g
Czas druku podany przez autora
31,8 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A clip to hold the Q30's headband in a useable position after it breaks

Ocena
5 / 5
Polubienia
19
Pobrania
143
Wydruki
1
Wyświetlenia
3283
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Share Alike

My Q30 headphones, like every over-ear headphone I've had before them, broke after a mere four months of use. Fortunately, the headband has a spring steel structural piece, so I could still use them, but the broken plastic threw off the symmetrical fit. Plastic parts on headphones seem to be made to break. Well, I've got a 3d printer now, so I designed a fix.

This is a 2-part clip that will hold the two pieces of plastic on either side of the break against the metal band. It effectively fixes the break. Just clip the larger piece over the band from the outside, then slide the smaller piece in from below. Congratulations, you've just significantly extended the life of your headphones. You could even print these and put them in place before any breaks happen – something I wish I had done with the other side of my headphones, since it broke in the same place as the first side eight months later.