Eryone Thinker SE Linear Rails Y axis Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod for mounting linear rails on the Y axis of the Eryone Thinker SE. Linear rails are 2x MGN12H 400mm. There are 2…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 760
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Mod for mounting linear rails on the Y axis of the Eryone Thinker SE.
Linear rails are 2x MGN12H 400mm.
There are 2 versions for the Endstop and Belt Adapter, read carefully!
Linear Rail on X axis
Print Belt-Adapter and Endstop-Adapter.
NO Linear Rail on X axis
Print Belt-W-Adjustable-Endstop. It is supposed to work by placing an M5 screw in the big hole to advance and retract the Y endstop. Please note that this part is not tested, as I have the full mod.
Print Settings
Printer:
Eryone Thinker SE
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
50%+
Filament:
Eryone PETG
Orange/White
Notes:
Print everything in PETG.
Category: 3D Printer Parts