1 / 9
48mm Mast Cap (bayonet fit) for ADS-B Radome Ground Plane Antenna — zdjęcie 1
1 / 9

48mm Mast Cap (bayonet fit) for ADS-B Radome Ground Plane Antenna

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The ADS-B radome by markend is a brilliant design - looks really smart and fits really nicely with no soldering…

Ocena
0 / 5
Polubienia
7
Pobrania
34
Wydruki
0
Wyświetlenia
599
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

The ADS-B radome by markend is a brilliant design - looks really smart and fits really nicely with no soldering necessary to fit everything together. My only issue with it was the mount, which I wanted to modify so that it would fit on top of a small 48mm diameter satellite dish mast (https://smile.amazon.de/gp/product/B0052AUX50/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) which I mounted to my balcony rail. This way the coax cable goes down through the mast and out the bottom and I left a cutout to allow other cables to run up the mast and in under the antenna to the inside, where they can also be routed down and out.

The mast attachment just pressure fits onto the top of the mast and then it has a bayonet style attachment to the antenna part.

Print Settings

Printer:

Creality Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

20%

Filament:

Eryone Ultrasilk PLA

Silver


Notes:

When putting on supports for the ring that attaches to the pipe, ensure that you select to generate supports everywhere, not just touching buildplate.

Category: Electronics

Tagi