Tequila Salt Shaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I printed the Shaker itself with tree supports so the holes come out well, other than that there isn't much.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed the Shaker itself with tree supports so the holes come out well, other than that there isn't much.
Shaker in PLA and the plug in TPU
Print Settings
Printer Brand: Creality
Printer: Ender 3
Rafts: No
Supports: Yes
Resolution: 200
Infill: 5%
Filament: PolyMaker PLA and TPU Post-Printing =============
Just take out the support on the inside, having one long seam is helpful, I used a pocketknife to scratch it out.
How I Designed This
Cut the hat on the top of a tequila bottel in half, traced it in fusion and then rotated it
Category: Kitchen & Dining
*Copied from phillips (Link)