Slatwall Flush VESA Mount 100x100
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VESA mount for 3" T-slot slatwall systems, such as NewAge slatwall system, or Gladiator slatwall system.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 216
- Wydruki
- 0
- Wyświetlenia
- 1244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
VESA mount for 3" T-slot slatwall systems, such as NewAge slatwall system, or Gladiator slatwall system.
Print standing upright/vertically with no supports using PETG.
Attach your display to the VESA mount with 4 M4 screws, then hang the display to the wall by slotting it into the slats. Once aligned it should gently drop into the slots and have a tight fit.
The “square” dimensions of the mount are 120x120mm, with standard VESA 100x100mm screw spacing. Make sure to check there is space for a 120x120mm plate on your display, otherwise feel free to remix/edit the model.
I printed in Prusament Jet Black PETG on a Prusa MK3S+ with a 0.4mm nozzle using the "0.30mm Draft" profile and it is securely supporting a 27" monitor.