HTC Vive Base station mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bough VR equipment a while a go and wanted to properly mount the base stations to walls. So designed these. I use…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 163
- Wydruki
- 0
- Wyświetlenia
- 1090
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Bough VR equipment a while a go and wanted to properly mount the base stations to walls. So designed these. I use version 2.0 base stations, but there's a mount for the version 1.0 too. Not tested on v1.0.
Replace the printable screws with proper metal screws if you think that they might not handle the weight. Or print them sideways sinc that produces tougher screws. On 2.0 bts I've had them on the wall for a couple of moths now without problems.
Source and files: https://github.com/spegelius/3DModels/tree/master/HTC_BTS_mount
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Filament: REAL PETG Grey
Notes:
Use good amount of perimeters, 4 or more.
With the screws, print more than one at a time so that there's no need to use too much part cooling.
Category: Organization