1 / 6
Bicycle wheel truing stand remix for fatbike rim
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the great thing from @Hardy, thanks for the design. I needed to modify the original thing so that…
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 1537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (32)Powiązane
This is a remix of the great thing from @Hardy, thanks for the design. I needed to modify the original thing so that it could fit my 80mm fatbike rim.
Changes:
- enlarged the gears to 52.5mm and created rimgrabber_gear_d variable
- longer grabber arms
- M8 nut diameter to 12mm, the M8 nuts here in Finland are smaller than the original 13mm
- some assorted mods to the OpenSCAD source, like code stylizing for me to read better
Everything works as in the original thing so please follow the instructions there.
Category: Hand Tools