PanelDue case swiveling mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed couple of the very nice PanelDue cases and wanted to have bit more mobility for the display. So designed this…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed couple of the very nice PanelDue cases and wanted to have bit more mobility for the display. So designed this swiveling mount. Works a treat, allows rotating the display and tilting vertically.
There are two versions of the swviel mounts, other one has two screw holes. PRobably not needed, so use 2 of the smaller mounts.
Should work with 2020 profiles, current printer I mounted mine is wood so I used wood screws to attach it.
Source: https://github.com/spegelius/3DModels/blob/master/PanelDue_Case_remix/PanelDue_Case_remix.scad
Category: 3D Printer Accessories