Tronxy X5S bed support system - extra rigid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So a while ago I was looking for parts to improve my X5S z stability. Found the z-support system and bed lowering by…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 803
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UpdatE: new version https://www.printables.com/model/745939-tronxy-x5s-bed-support-system-ver2
So a while ago I was looking for parts to improve my X5S z stability. Found the z-support system and bed lowering by simonvez, but wanted to make it even more supportive. So I added room for additional LM8UU bearings for both z rods. Also because creating holes that are perfectly sized for all printers is quite impossible, I made the holes use the system I saw @MakersMuse use on his printed 3D printer. So the bearing hole should adjust to the bearing and print quality.
Later Exerqtor released his version that regains some lost z-height so I incorporated that as well.
For extra z height there's 5mm thick blocks you can print if needed.
OpenSCAD source: https://github.com/spegelius/3DModels/blob/master/PrinterParts/Tronxy/z_support_remix.scad
Print Settings
Printer:
Tronxy X5S
Rafts:
No
Supports:
Yes
Resolution:
0.15-0.25
Infill:
20%
Filament:
3DJake PLA
Black
Notes:
Use supports for the middle overhangs. 2 or 3 perimeters should be enough.
Category: 3D Printer Parts